CAP SORTERS
OPTIONS:
VSE-30 | VSE-18 | Z-24 | HSC-24 | TOTE DUMPER | BULK CAP ELEVATOR | CAP BLOWER

The VSE-30® Vertical Cap Sorter is Fogg’s fastest cap sorter for high speed capping applications. This model cap feeder has also been designed to sort smaller diameter caps much faster.
Works With Fogg Tote Dumper

Product Details for VSE-30®
CONVEYOR: Variable speed “no jam” conveyor
CHANGEOVER: The cap elevator has tool-less changeover with innovative cleats
CONSTRUCTION: 304 stainless steel construction
CAP HOPPER: Seamless cap hopper with variable speed cap pre-feeder
EASY CLEAN OUT: Easy clean out of caps – no “lips” or edges
PITCHING: All surfaces pitched for water runoff
PLC CONTROLLER: PLC controller for enhanced operator interface
VERSATILE OPERATION: Easily re-configured for left or right hand applications
OPTIONAL ADDITIONS: Optional extended hopper and Tote Dumper

The VSE-18® Vertical Cap Sorter is Fogg’s economical solution for low to medium cap sorting applications. It sorts flat and sports caps from 20mm to 70mm.
Works With Fogg Tote Dumper

Product Details for VSE-18®
CAP SIZES: The VSE-18® cap sorters sort flat and sport caps from 20mm to 70mm
ELEVATOR WIDTH: The cap elevator is 18″ wide to conveyor the cap
CONVEYOR TYPE: Variable speed “no jam” conveyor
CHANGEOVER: Tool-less changeover
INTERFACE: PLC controller for enhanced operator interface
CAP HOPPER: Seamless cap hopper with variable speed cap pre-feeder
EASY CLEAN OUT: Easy clean out of caps – no “lips” or edges
PITCHING: All surfaces pitched for water runoff
OPTIONAL ADDITIONS: Optional extended hopper and Tote Dumper
Pocket Sorter
Sorts 300-500 caps per minute
Gentle on caps
Change over is tool-less with replaceable inserts for different cap designs
Pairs great with bulk cap elevator (shown on right) to get caps to the pre-feeder
Can sort corks, ROPP caps, and screw caps on one machine
Left and right hand discharge available in single set up to minimize change over

The Z-24® cap sorter has been designed to orientate flat caps without a vertical tamper evident pull tab. This cap feeder sorts sizes ranging from 24mm – 63mm with ranging speeds up to 450 caps per minute, but speeds are dependent upon cap diameter.

Product Details for Z-24® Cap Sorter
HOPPER: Clear hopper
MAINTENANCE: Low maintenance
CAP CHANGE RATE: Very rapid cap change
HSC-24
The HSC-24 Cap Sorter is a random-apply pickup cap sorter for vertical-tail, tamper-evident, caps from 28 mm to 43mm. This cap feeder would be dedicated to the vertical-tail caps.

Product Details for HSC-24 Cap Sorter
VERSATILITY: Highly visible, easy-to-access doors, totally enclosing the cap sorting area
CHANGEOVER: Easy hopper unloading for fast change over
HEIGHT: Height is easily adjustable for your requirements
PLC CONTROLLER: Can be fully integrated to the filler PLC or electrically independent
SPEED: Up to 500 38mm caps per minute

The Tote Dumper is ideal for maximizing efficiency of caps being supplied to high production packaging lines. It can be coupled with your VSE-18 cap sorter or VSE-30 cap sorter cap sorter with an extended hopper.

Product Details for Tote Dumpers
CONSTRUCTION: Stainless steel construction with OSHA compliant guarding
LIGHTING: Integral lighting and roof to reduce possible contamination of caps
PLC CONTROLLER: Fully programmable Allen Bradley PLC with touch screen

The Fogg Bulk Cap Elevator can be coupled with Fogg’s Z-24 sorter (and many other cap sorters) to make a cost effective sorting system. The cap feeder elevator can be custom made to a specific height to meet your requirements. It carries caps from the 9 cubic foot hopper up to the cap sorter to easily keep up with the Z-24 cap sorter. The plastic carrier belt is virtually maintenance free and its variable speed drive DC motor will assure smooth operation. Custom hoppers are also available.

The Fogg Cap blower transports caps to the sorter. It is a huge advantage for plants with limited floor space. This unit will allow you to blow the caps up to 40 feet into your cap sorter. It is equipped with a 10 cubic foot hopper and is able to blow caps as large as 43mm. No ladders are required.
OPTIONS
- PVC or Stainless Steel Pipe with removable clamps
- HEPA air filtration
- Operator warning light
- small capacity hopper