CAPPING MACHINES
OPTIONS:
ARTICULATING JAW | ROPP CAPPER | CAP IN HEAD | 700 SERIES | STANDARD
DECLINING BELT | FREE STANDING | HEAT SEAL | ROLL SNAP | MORE OPTIONS
ARTICULATING JAW The Fogg Articulating Jaw Capper is the ideal solution for the largest variety of capping needs. The articulating jaws act like fingers and can securely grab on to even the most unique cap with precision.
Product Details for Articulating Jaw Capper
CONFIGURATION: Available in right or left-hand, stand-alone or monobloc configurations
TORQUE: Magnetic capping heads apply smooth constant torque not “pole to pole” ratcheting like many others.
TURRET SIZE: small turret diameter allows for versatility and efficiency
CAPPING RATE: This capping equipment caps up to 40 containers per capping head, per minute
ACCURACY: Capping machines provide accurate cap application through positive control of caps and containers
BOX CAM: Captured box cam provides positive capping head control
NO BOTTLE PANELING: Fogg Cap in Head capping machines eliminate bottle paneling
SPINDLE DRIVE: VFD-controlled spindle drive for maximum flexibility
PRECISION: Optional electronic positioning for precise height control from changeover to changeover
ROPP CAPPER
FOGG ROPP Capper applies are ROPP Caps with precision at high and low speeds. This capper is capable of capping short and long skirts.
Product Details for ROPP Capper
CONFIGURATION: ROPP Capping heads are attached to an articulating jaw capper base
CHANGEOVER RATE: Rapid changeover for less down time
LUBE-FREE: Minimal lubrication
CAP IN HEAD
The Fogg Cap In Head (Pick-N-Place) capping machines deliver optimum performance across a wide range of cap and bottle styles. Bottles are kept on plane, with neck support, while the cap is delivered in the capping chuck.
Product Details for Cap In Head Capper
CONFIGURATION: Available in right or left-hand, stand-alone or monobloc configurations
TORQUE: Magnetic capping heads apply smooth constant torque not “pole to pole” ratcheting like many others.
TURRET SIZE: small turret diameter allows for versatility and efficiency
CAPPING RATE: This capping equipment caps up to 40 containers per capping head, per minute
ACCURACY: Capping machines provide accurate cap application through positive control of caps and containers
CHANGEOVER RATE: Rapid changeover for less down time
BOX CAM: Captured box cam provides positive capping head control
LUBE-FREE: Fogg capping spindles are lube-free eliminating grease/oil from the spindles which can run down and contaminate bottles
NO BOTTLE PANELING: Fogg Cap in Head capping machines eliminate bottle paneling
MANIFOLD TYPE: Steam cap manifold and control
SPINDLE DRIVE: VFD-controlled spindle drive for maximum flexibility
PRECISION: Optional electronic positioning for precise height control from changeover to changeover
700 SERIESThe Fogg 700 Series bottle capping machines features Set-N-Place technology to place the cap on the bottle. This technology is used to support the neck throughout the capping process in light weight PET to eliminate paneling.
Product Details for 700 Series Capper
CAP SIZES: Caps sport caps and flat caps with sizes ranging from 24mm-89mm
CHANGEOVER RATE: Rapid changeover for less down time
CONFIGURATION: Stand-alone & monobloc
TORQUE: Magnetic capping heads apply smooth constant torque not “pole to pole” ratcheting like many others
TURRET SIZE: small turret diameter allows for versatility and efficiency
BARREL CAM: Hardened barrel cam provides precise motion, control, and longevity to spindle linear motion
SPINDLE DRIVE: VFD-controlled spindle drive for maximum flexibility
PRECISION: Optional electronic positioning for precise height control from changeover to changeover
STANDARD CAPPERFogg’s Standard capping machines offer cost-effective performance in applications where neck support is not required. This capping equipment was developed for low speed dairy gallon and 1/2 gallon applications.
Product Details for Standard Capper
SPINDLE DRIVE: There is a VFD-controlled spindle drive for maximum flexibility
PRECISION: Optional electronic positioning for precise height control from changeover to changeover
TECHNOLOGY: Set-N-Place capping technology
CAPPING RATE: These screw cap machines cap up to 20 containers per capping head, per minute
CAPPING SIZE: Accomodates sport caps and flat caps with sizes ranging from 24mm to 89mm
CONFIGURATION: Capping machines available in right or left hand, stand-alone, or monobloc configurations
DECLINING BELTThe Declining Belt Capper presses snap-caps on over caps for a unique look. It can accommodate many cap styles with sizes ranging from 24mm – 89mm. You can easily adjust to multiple bottle sizes and shapes as well.
Product Details for Declining Belt Capper
CONEYOR: Accomodates customer conveyer heights
ELECTRIC: 208, 240, or 480 volt 30 phase
CONTROL: PLC controlled
CAPPING SIZE: Accommodates 24mm – 89mm
FREE STANDINGThe Fogg Free Standing Capper is easily integrated to any line. It can also easily be coupled with a Fogg Cap Sorter to feed the caps to the capper. This is an ideal solution for non-liquid products that Fogg Fillers do not fill; or if there is an existing line that is in need of additional capping styles. With your choice of capping turrets, the application options are endless.
Product Details for Free Standing Capper
CAP TYPE: Best suited to cap flat, sport, snap, and screw caps
CAPPING RATE: Variable speed that can cap 0-800 caps per minute depending on the application
GUARDING: Machine guarding for safety and sanitation
SPINDLE DRIVE: VFD controlled independent spindle drive
CONSTRUCTION: Stainless-steel construction
CAPPING SIZE: Accomodates 23mm – 89mm size caps
WASH DOWN: Simple wash down with built in drains and exterior trough to eliminate pooling or build up
HEAT SEALThe Fogg Heat Seal Capper is ideal for foil applications. It is a very cost effective solution to help ensure product safety.
Product Details for Heat Seal Capper
THERMOSTAT CONTROLLED: This Heat Seal Capper has a temperature thermostat controlled on operator panel
BOX CAM: The air operated cam lowers the bottle away from the cam if machine stops occur to ensure there is no over heating of foil
HEATING HEAD: SIndividual, Stainless Steel, Quick Change, Spring Loaded Heating Heads
SHROUD: Stainless Steel Shroud
PRECISION: Optional electronic positioning for precise height control from changeover to changeover
ROLL SNAPFogg’s Roll Snap Capper is used for a higher level of efficiency on lightweight bottles.
Product Details for Roll Snap Capper
PRECISION: Optional electronic positioning for precise height from changeover to changeover
CLEANING: Quick-Change feature for fast and convenient cleaning
VERSATILE: These Roll Snap Capping Chucks can also be used on a screw capper for greater versatility
MORE OPTIONS
At times a customer may require different capping equipment that Fogg does not manufacture. In these situations Fogg is willing to integrate non-Fogg bottle capping machines into the filling system. Fogg will mount the capper onto the base of the filler and incorporate the capper’s electronic functions to the HMI. We will also integrate the capper bottle handling components to ensure smooth operation.
Fogg’s common capping equipment integration partners include:
- AROL
- Fowler Zalkin
- KHS
- Alcoa